Packaging

Lidded drum for powder

• Material: sheet steel, inside unfinished, without any inner          coating

• Capacity: 216l

• External diameter: approx. 585,0 mm

• External height: approx. 885,0 mm

• Empty weight: approx. 17,0 kg

• Seal: cellular rubber, 8 mm hermetically sealed

• Subpackaging (standard): 500 x 900 mm antistatic PE bags

• PE inliner, upon request 

Net weight per drum:

• 100 kg sub-packaged in PE bags 10 kg

• 25 kg also possible

• Lots up to 130 kg available, at customer request

Well packaged: Alkoxides powder sub-packaged and protected in PE inliners

Screw-cap drum for solution

• Material: sheet steel

• Capacity: approx. 216 l

• External diameter: approx. 585,0 mm

• External height: approx. 882,0 mm

• Empty weight: approx. 18,0 kg

• Bunghole with openings of 2" and 3/4"

Net weight:

• Sodium methylate 30% solution: 200 kg

• Sodium methylate 25% / 28% solution: 190 kg

• Potassium methylate 32% solution: 200 kg

• all others: 180 kgall others: 180 kg

CP3-pallet

• Dimensions: (1140 x 1140 x 138) mm

• Due to technical reasons, only full pallets are dispatched

• Country-specific requirements for wooden pallets will be met by appropriate pre-treatment of pallets 

• Suparna products are shipped on small (95x95CM) pallets

Quantities per pallet for powder:

• Sodium methylate, potassium methylate, sodium ethylate, potassium ethylate 4 drums of 100 kg net each, sub-packaged 10 x 10 kg (standard)

• KTB (potassium t-butylate), NTB (sodium t-butylate), KTA (potassium t-amylate) and NTA (sodium t-amylate) 4 drums of 50 kg net each, sub-packaged 4 x 50 kg

Quantities per pallet for solution:

• Sodium methylate solution 30% 800 kg

• Sodium methylate solution 25% 760 kg

• Sodium methylate solution 28% 760 kg

• Potassium methylate solution 32% 800 kg

• Sodium ethylate solution 21% 720 kg 

Advice for container shipment:

• 20"-container 80 drums

• 40"-container 160 drums

• Fill capacity: approx. 21,000 kg

• Loading via manhole under a nitrogen blanketing

• Unloading via bottom valve 20 to 25 t by means of pumping under inert gas atmosphere, preferably with of gas displacement

• Vehicles can be equipped with the pump on request

• However, a stationary pump on the tank is recommended.

Dimensions: 1200 x 1000 x 1160 mm

ISO Bulk Containers (IBC) made from polyethylene with screw cap of Ø 150 mm and RI or RI 40 drain cock at the base, in protective cage of welded steel lattice matting.

Transportation permits in compliance with RID-ADR and IMDG Code international regulations.

IBC containers only available for Solutions.